P30F2

DTC Logic


DTC DETECTION LOGIC

NOTE:
- If DTC "P0AC0", "P0AC1" or "P0AC2" is displayed with DTC "P30F2", first perform the trouble diagnosis for
DTC "P0AC0", "P0AC1" or "P0AC2".
- Prolonged cranking due to running out of gasoline may cause the detection of this DTC.






DTC CONFIRMATION PROCEDURE


1. PERFORM DTC CONFIRMATION PROCEDURE

WITH CONSULT
1.Turn ignition switch ON and wait at least 10 seconds.
2.Select "Self Diagnostic Result" mode of "HV BAT" using CONSULT.
Is P30F2 detected?
YES- .
NO- INSPECTION END


Diagnosis Procedure


1. PERFORM SELF-DIAGNOSIS

WITH CONSULT
Perform "All DTC Reading" with CONSULT.
Is DTC detected?
YES- Perform diagnosis procedure of applicable DTC.
NO- Replace battery junction box (current sensor) and Li-ion battery controller.