B2192

B2192 ID DISCORD, IMMU-ECM

DTC Logic


DTC DETECTION LOGIC







DTC CONFIRMATION PROCEDURE


1. PERFORM DTC CONFIRMATION PROCEDURE

1.Turn ignition switch ON.
2.Check DTC in "Self Diagnostic Result" mode of "BCM" using CONSULT.
Is DTC detected?
YES- Go to .
NO- INSPECTION END


Diagnosis Procedure


1. PERFORM INITIALIZATION

1.Perform initialization of BCM and reregistration of all Intelligent Keys using CONSULT.
2.Check that the vehicle can be set to READY using registered Intelligent Key.
Is the inspection result normal?
YES- INSPECTION END
NO- GO TO 2.

2. CHECK SELF DIAGNOSTIC RESULT

1.Select "Self Diagnostic Result" mode of "EV/HEV" using CONSULT.
2.Erase DTC.
3.Perform DTC CONFIRMATION PROCEDURE for DTC B2192. .
Is DTC detected?
YES- GO TO 3.
NO- INSPECTION END

3. REPLACE BCM

1.Replace BCM. Service and Repair.
2.Perform initialization of BCM and registration of all Intelligent Keys using CONSULT.
3.Check that the vehicle can be set to READY using registered Intelligent Key.
Is the inspection result normal?
YES- INSPECTION END
NO- GO TO 4.

4. REPLACE HPCM

1.Replace HPCM. Removal and Installation.
2.Perform "ADDITIONAL SERVICE WHEN REPLACING CONTROL UNIT". HPCM Description and HPCM Work Procedure.
- INSPECTION END