B2562

DTC Logic


DTC DETECTION LOGIC







DTC CONFIRMATION PROCEDURE


1. DTC CONFIRMATION

1.Erase DTC.
2.Turn ignition switch OFF.
3.Perform the "Self Diagnostic Result" of CONSULT-III, when passed 120 seconds or more after the ignition switch is turned ON.
Is any DTC detected?
YES- .
NO- INSPECTION END


Diagnosis Procedure


1. CHECK POWER SUPPLY CIRCUIT

Check BCM power supply circuit. Initial Inspection and Diagnostic Overview.
Is the circuit normal?
YES- Replace BCM. Removal and Installation.
NO- Repair the malfunctioning part.