Removal and Installation

TILT&TELESCOPIC SWITCH

Removal and Installation


REMOVAL


CAUTION:
When removing and installing, use shop cloths to protect parts from damage.
1.Disconnect battery negative terminal.
2.Remove the steering column mask (1). Removal and Installation A/T Models.





3.Press pawls and remove tilt & telescopic switch (2) from the steering column mask (1).






INSTALLATION

Install in the reverse order of removal.

CAUTION:
Be sure to clump the harness to the right place.
NOTE:
After installing the driver seat, perform additional service when removing battery negative terminal. Refer to
{LINK_TO_MANY:0000000007463773}{LINK_TO_MANY:0000000007463774}{LINK_TO_MANY:0000000007463775}, "ADDITIONAL SERVICE WHEN REMOVING BATTERY NEGATIVE TERMINAL : Special Repair
Requirement".