Removal and Installation

OIL PUMP

Removal and Installation


REMOVAL

1.Remove oil pan (upper and lower) and oil strainer.
- VQ-25HR 2WD models: Exploded View.
- VQ-25HR AWD models: Exploded View.
- VQ-37VHR 2WD models: Exploded View.
- VQ-37VHR AWD models: Exploded View.
2.Remove front timing chain case and timing chain (primary). Exploded View (VQ-25HR)
or Exploded View (VQ-37VHR).
3.Remove oil pump assembly.

INSTALLATION


CAUTION:
Before installation, apply new engine oil to the parts as instructed in the figure.
Note the following, and install in the reverse order of removal.
- When installing, align crankshaft flat faces with oil pump inner rotor flat faces.