Sunroof

SUNROOF

Description

- BCM supplies power.
- Sunroof motor assembly is sunroof motor and CPU integrated type.
- Tilts up/down & slides open/close by sunroof switch operation.
- In order to close sunroof lid certainly with the signal from unified meter and A/C amp. at the time of high speed run, the sunroof motor torque at the time of tilt-down operation is controlled.


Component Function Check


1. CHECK SUNROOF FUNCTION

Check tilt up/down & slide open/close operations with sunroof switch.
Is the inspection result normal?
YES- Sunroof function is OK.
NO- .


Diagnosis Procedure


1. CHECK POWER SUPPLY CIRCUIT

1.Turn ignition switch OFF.
2.Disconnect sunroof motor assembly connector.
3.Turn ignition switch ON.
4.Check voltage between sunroof motor assembly connector and ground.





Is the measurement value within the specification?
YES- GO TO 2.
NO- GO TO 3.

2. CHECK GROUND CIRCUIT

1.Turn ignition switch OFF.
2.Check continuity between sunroof motor assembly connector and ground.





Is the inspection result normal?
YES- GO TO 4.
NO- Repair or replace harness.

3. CHECK SUNROOF MOTOR CIRCUIT

1.Turn ignition switch OFF.
2.Disconnect BCM connector.
3.Check continuity between BCM connector and sunroof motor assembly connector.





4.Check continuity between BCM connector and ground.





Is the inspection result normal?
YES- Replace BCM. Exploded View.
NO- Repair or replace harness.

4. CHECK SUNROOF SWITCH INPUT SIGNAL

1.Connect sunroof motor assembly connector.
2.Turn ignition switch ON.
3.Check voltage between sunroof motor assembly connector and ground.





Is the measurement value within the specification?
YES- Replace sunroof motor assembly.
NO- GO TO 5.

5. CHECK SUNROOF SWITCH CIRCUIT

1.Turn ignition switch OFF.
2.Disconnect sunroof motor assembly connector and sunroof switch connector.
3.Check continuity between sunroof motor assembly connector and sunroof switch connector.





4.Check continuity between sunroof motor assembly connector and ground.





Is the inspection result normal?
YES- GO TO 6.
NO- Repair or replace harness.

6. CHECK SUNROOF SWITCH GROUND CIRCUIT

Check continuity between sunroof switch connector and ground.





Is the inspection result normal?
YES- GO TO 7.
NO- Repair or replace harness.

7. CHECK SUNROOF SWITCH

Check sunroof switch.
.
Is the inspection normal?
YES- GO TO 8.
NO- Replace sunroof switch.

8. CHECK INTERMITTENT INCIDENT

Intermittent Incident.
- INSPECTION END


Component Inspection


SUNROOF SWITCH


1. CHECK SUNROOF SWITCH

1.Turn ignition switch OFF.
2.Disconnect sunroof switch connector.
3.Check continuity sunroof switch terminals.





Is the inspection result normal?
YES- INSPECTION END
NO- Replace sunroof switch.