Removal and Installation

TRUNK LID

TRUNK LID ASSEMBLY : Removal and Installation


REMOVAL

1.Remove trunk lid finisher inner. Removal and Installation.
2.Disconnect the connectors in the trunk lid, and remove the harness clamps to pull the harness out of the trunk lid.
3.Insert flat-bladed screwdriver into the gap and remove holder.
4.Remove trunk lid stay.

WARNING:
Body injury may occur if no supporting rod is holding the trunk lid open when removing the damper stay.
5.Remove the trunk lid hinge mounting bolts on trunk lid side and remove the trunk lid assembly.

INSTALLATION

Install in the reverse order of removal.

CAUTION:
- After installing, apply touch-up paint (the body color) onto the head of the hinge mounting bolts.
- After installing, check operation.
- After installing, perform fitting adjustment. Adjustments.