B2461

B2461 VHCL SPEED SIGNAL





Description
Inputs the vehicle speed signal from combination meter via CAN communication.




DTC Logic

DTC DETECTION LOGIC

NOTE:
If DTC B2461 is displayed with DTC U1000, first perform the trouble diagnosis for DTC U1000. Suspension Control.






DTC CONFIRMATION PROCEDURE
1.SELF-DIAGNOSIS WITH PRE-CRASH SEAT BELT CONTROL UNIT
1. Turn ignition switch ON.
2. Check "Self-diagnostic result" with CONSULT-III.
Is DTC detected?
YES - SEE Diagnosis Procedure.
NO - INSPECTION END




Diagnosis Procedure
1.CHECK DTC WITH "UNIFIED METER AND A/C AMP."
Check "Self-diagnostic result" for "METER/M&A" with CONSULT-III. Scan Tool Testing and Procedures.
Is DTC detected?
YES - Repair or replace malfunctioning parts.
NO - GO TO 2.
2.CHECK INTERMITTENT INCIDENT
Intermittent Incident.
- INSPECTION END