Backup Light Bulb: Service and Repair

BACK-UP LAMP


Replacement


CAUTION:
- Disconnect the battery negative terminal or remove the fuse.
- Never touch the glass of bulb directly by hand. Keep grease and other oily matters away from it.
- Never touch bulb by hand while it is lit or right after being turned off.
- Never leave bulb out of lamp reflector for a long time because dust, moisture smoke, etc. may affect the performance of lamp. When replacing bulb, be sure to replace it with new one.

BACK-UP LAMP BULB
1. Remove the trunk lid finisher inner. .
2. Disconnect the back-up lamp connector.





3. Turn the bulb socket (1) counterclockwise and unlock it.
4. Remove the bulb (2) from the socket.