Diagnosis Procedure

ID REGISTRATION CANNOT BE COMPLETED


Diagnosis Procedure

1.TRANSMITTER WAKE-UP
Perform the transmitter wake-up. Work Procedure.
Is the transmitter wake-up completed?
YES - GO TO 3.
NO - GO TO 2.
2.CHECK ACTIVATION TOOL
Check activation tool.
Is the inspection result normal?
YES - GO TO 3.
NO - Replace battery for activation tool, or repair or replace activation tool.
3.TRANSMITTER ID REGISTRATION
Perform transmitter ID registration. ID Registration.
Is transmitter ID registration completed?
YES - GO TO 4.
NO - Change the work location and perform ID registration again.
4.CHECK TIRE PRESSURE SIGNAL
With CONSULT-III
1. Drive for 3 minutes at a speed of 40 km/h (25 MPH) or more, then drive normally for 10 minutes.
2. Stop the vehicle.
3. Select "DATA MONITOR" for "AIR PRESSURE MONITOR" with CONSULT-III.
4. Within 5 minutes after vehicle stopped, check that the tire pressures match the standard value.





Is the inspection result normal?
YES - INSPECTION END
NO - Change the work location, then GO TO 3.