Removal and Replacement

OIL PUMP


Removal and Installation


REMOVAL
1. Remove oil pan (upper and lower) and oil strainer.
- VQ25HR 2WD models: .
- VQ25HR AWD models: Exploded View.
- VQ37VHR 2WD models: .
- VQ37VHR AWD models: Exploded View.
2. Remove front timing chain case and timing chain (primary). Exploded View (VQ25HR) or Exploded View (VQ37VHR).
3. Remove oil pump assembly.

INSTALLATION

CAUTION:
Before installation, apply new engine oil to the parts as instructed in the figure.
Note the following, and install in the reverse order of removal.
- When installing, align crankshaft flat faces with oil pump inner rotor flat faces.