Diagnosis Procedure

SEAT MEMORY INDICATOR


Diagnosis Procedure

1.CHECK MEMORY INDICATOR POWER SUPPLY
Check voltage between seat memory switch harness connector and ground.





Is the inspection result normal?
YES - GO TO 2.
NO-1 - 10 A fuse [No. 10 located in fuse block (J/B)].
NO-2 - Harness for open or short between memory indicator and fuse.
2.CHECK MEMORY INDICATOR CIRCUIT
1. Turn ignition switch OFF.
2. Disconnect automatic drive positioner control unit and seat memory switch connector.
3. Check continuity between automatic drive positioner control unit harness connector and seat memory switch harness connector.





4. Check continuity between automatic drive positioner control unit harness connector and ground.





Is the inspection result normal?
YES - Replace seat memory switch. Removal and Installation.
NO - Repair or replace harness.