Diagnosis Procedure Base Audio With Rear View Camera

CAMERA IMAGE SIGNAL CIRCUIT


Diagnosis Procedure

1.CHECK CONTINUITY CAMERA POWER SUPPLY CIRCUIT
1. Turn ignition switch OFF.
2. Disconnect AV control unit connector and rear view camera connector.
3. Check continuity between AV control unit harness connector and rear view camera harness connector.





4. Check continuity between AV control unit harness connector and ground.





Is inspection result normal?
YES - GO TO 2.
NO - Repair harness or connector.
2.CHECK VOLTAGE CAMERA POWER SUPPLY
1. Connect AV control unit connector and rear view camera connector.
2. Turn ignition switch ON.
3. Shift the selector lever to "R".
4. Check voltage between AV control unit harness connector and ground.





Is inspection result normal?
YES - GO TO 3.
NO - Replace AV control unit. Exploded View Base Audio With Rear View Camera.
3.CHECK CONTINUITY CAMERA IMAGE SIGNAL CIRCUIT
1. Turn ignition switch OFF.
2. Disconnect AV control unit connector and rear view camera connector.
3. Check continuity between AV control unit harness connector and rear view camera harness connector.





4. Check continuity between AV control unit harness connector and ground.





Is inspection result normal?
YES - GO TO 4.
NO - Repair harness or connector.
4.CHECK CAMERA IMAGE SIGNAL
1. Connect AV control unit connector and rear view camera connector.
2. Turn ignition switch ON.
3. Shift the selector lever to "R".
4. Check signal between AV control unit harness connector and ground.





Is inspection result normal?
YES - Replace AV control unit. Exploded View Base Audio With Rear View Camera.
NO - Replace rear view camera. Exploded View Base Audio.