Transfer Fluid

TRANSFER FLUID


Replacement


DRAINING
1. Run the vehicle to warm up the transfer unit sufficiently.





2. Stop the engine, and remove the drain plug to drain the transfer fluid.

CAUTION:
When draining fluid, protect exhaust tube flange with cover.
3. Apply sealant to drain plug. Install drain plug on transfer and tighten to the specified torque. Overhaul.
- Use Genuine Silicone RTV or equivalent. Fluid Type Specifications.

CAUTION:
Remove old sealant adhering to mounting surfaces. Also remove any moisture, oil, or foreign material adhering to application and mounting surfaces.

FILLING





1. Remove filler plug and add transfer fluid until fluid level reaches the specified limit near filler plug mounting hole.

Fluid capacity: Approx. 1.25 l (2-5/8 US pt, 2-1/4 Imp pt)

CAUTION:
Carefully fill the fluid. (Fill up for approx. 3 minutes.)
2. Leave the vehicle for 3 minutes, and check the fluid level again.
3. Set a new gasket onto filler plug and install it on transfer and tighten to the specified torque. Transfer Assembly Overhaul, "Disassembly
and Assembly".

CAUTION:
Do not reuse gasket.