Turn Signal Indicator Lamp Does Not Operate

TURN SIGNAL AND HAZARD WARNING LAMPS


Turn Signal Indicator Lamp Does Not Operate

1.CHECK UNIFIED METER AND A/C AMP.
CONSULT-III SELF-DIAGNOSIS
1. Perform self-diagnosis for "METER A/C AMP" on CONSULT-III.
2. Check if malfunction is indicated.
Is malfunction indicated?
YES - Repair or replace malfunctioning parts.
NO - GO TO 2.
2.CHECK CIRCUIT BETWEEN COMBINATION SWITCH AND BCM
CONSULT-III DATA MONITOR
1. Select "TURN IND" of METER A/C AMP data monitor item.
2. With operating the turn signal switch, check the monitor status.

When turn signal switch is in the RH or LH position : TURN IND ON

OK or NG
OK - Replace combination meter. Refer to Removal and Installation of Combination Meter.
NG - Replace unified meter and A/C amp. Refer to Service and Repair.