CAN Communication Line

TROUBLE DIAGNOSIS FOR SYSTEM


DTC U1000 CAN COMMUNICATION LINE


DIAGNOSTIC PROCEDURE
- Check the following if "CAN COMM CIRCUIT [U1000]" is detected in self-diagnosis results of CONSULT-III.
1.CHECK CAN COMMUNICATION CIRCUIT

With CONSULT-III
1. Turn ignition switch "ON" and start engine.
2. Select "SELF-DIAG RESULTS" mode for "ALL MODE AWD/4WD" with in CONSULT-III.
3. Perform the self-diagnosis.
Is the "CAN COMM CIRCUIT [U1000]" displayed?
YES - Print out CONSULT-III screen and go to CAN System Specification Chart.
NO INSPECTION END