Front Suspension Assembly

FRONT SUSPENSION ASSEMBLY


On-Vehicle Inspection

Make sure the mounting conditions (looseness, back lash) of each component and component conditions
(wear, damage) are normal.

INSPECTION OF UPPER LINK BALL JOINT END PLAY
1. Set front wheels in a straight-ahead position. Do not depress brake pedal.
2. Place an iron bar or similar tool between transverse link and steering knuckle.
3. Measure axial end play by prying it up and down.

Axial end play : 0 mm (0 in)


CAUTION:
Be careful not to damage ball joint boot. Do not damage the installation position by applying excessive force.

SHOCK ABSORBER INSPECTION
Check for oil leakage, damage and breakage of installation positions.