Yaw Rate Sensor: Service and Repair

YAW RATE/SIDE G SENSOR


Removal and Installation


CAUTION:
- Do not drop or strike yaw rate/side G sensor, because it has little endurance to impact.
- Do not use power tool etc., because yaw rate/side G sensor is sensitive for the impact.

REMOVAL
1. Remove center console. Refer to Instrument Panel, "INSTRUMENT PANEL





: Component Parts Location".
2. Disconnect yaw rate/side G sensor harness connector.
3. Remove mounting bolts. Remove yaw rate/side G sensor (1).

INSTALLATION
Installation is the reverse order of removal.

Yaw rate/side G sensor mounting bolt : 6.5 N�m (0.66 kg�m, 58 in-lb)