Removal and Installation

OIL PUMP


Removal and Installation


REMOVAL
1. Remove oil pan (lower) and oil strainer. Refer to Service and Repair.
2. Remove front timing chain case and timing chain (primary). Refer to Exploded View.
3. Remove oil pump assembly.

INSTALLATION

CAUTION:
Before installation, apply new engine oil to the parts as instructed in the figure.
Note the following, and install in the reverse order of removal.
- When installing, align crankshaft flat faces with oil pump inner rotor flat faces.

INSPECTION AFTER INSTALLATION
1. Check the engine oil level. Refer to Testing and Inspection.
2. Start the engine, and check there is no leakage of engine oil.
3. Stop the engine and wait for 10 minutes.
4. Check the engine oil level and adjust the level. Refer to Testing and Inspection.