Inspection 11 RAS Warning Lamp Signal

TROUBLE DIAGNOSIS


Inspection 11 RAS Warning Lamp Signal


INSPECTION PROCEDURE
1.CHECK SYSTEM FOR CAN COMMUNICATION LINE
1. Turn ignition switch OFF, disconnect RAS control unit harness connector and check terminal for deformation, disconnection, looseness, etc.
2. Reconnect harness connector securely, and perform CONSULT-III self-diagnosis.
Is the "CAN COMM CIRCUIT [U1000]" or "CONTROL UNIT (CAN) [U1010]" display?
OK - Combination meter is malfunctioning. Perform trouble diagnosis for combination meter. Refer to System Description.
NG - Perform trouble diagnosis for CAN communication system.