Pinout Values and Diagnostic Parameters

ABS ACTUATOR AND ELECTRIC UNIT (CONTROL UNIT)


Reference Value


VALUES ON THE DIAGNOSIS TOOL

CAUTION:
The display shows the control unit calculation data, so a normal value might be displayed even in the event the output circuit (harness) is open or short-circuited.

















NOTE:
- 1: Confirm tire pressure is normal.
- 2: A brief moment of On/Off condition occurs every 20 seconds after ignition switch turned ON. This is not malfunction because it is an operation for checking.
- 3: On and off timing for warning lamp and indicator lamp.
- ABS warning lamp: Refer to Description Diagnosis Procedure
- Brake warning lamp: Refer to Description Diagnosis Procedure
- VDC OFF indicator lamp: Refer to Description Description
- SLIP indicator lamp: Refer to Description Diagnosis Procedure