Removal and Installation

REAR OIL SEAL


Removal and Installation


REMOVAL
1. Separate propeller shaft assembly. Refer to Removal And Installation.





2. Remove rear oil seal using the puller [SST: KV381054S0 (J-34286)].

CAUTION:
Never damage rear extension.

INSTALLATION
1. Apply multi-purpose grease to lip of rear oil seal (1). Drive in rear oil seal to rear extension using the drift (A) [SST: ST33400001
(J-26082)].





Dimension "H" : 1.2 - 2.2 mm (0.047 - 0.087 in)

CAUTION:
- Never reuse rear oil seal.
- When installing, never incline rear oil seal.
2. Install propeller shaft assembly. Refer to Removal And Installation.