Refilling

GEAR OIL


Refilling






1. Remove filler plug (1). Fill with new gear oil to transmission as shown in the figure.

Oil grade and viscosity : Refer to MA-10, "Fluids and Lubricants". Maintenance
Oil capacity : Refer to TM-77, "General Specifications" General Specifications

2. After refilling gear oil, check oil level. Refer to Testing and Inspection.
3. Set a gasket on filler plug and then install it to transmission case.

CAUTION:
Never reuse gasket.
4. Tighten filler plug to the specified torque. Refer to Exploded View.