Floor Trim

FLOOR TRIM


Removal and Installation


REMOVAL
1. Remove front seat assembly (LH/RH). Refer to Removal and Installation.
2. Remove rear seat cushion. Refer to Removal and Installation.
3. Remove accelerator pedal pad. Refer to Service and Repair.





4. Disengage clip of floor hook (1) with remover tool (A).
5. Remove foot grille. Refer to Foot Grille.
6. Remove front seat belt floor anchor bolt (LH/RH). Refer to Exploded View.
7. Remove center console assembly. Refer to Removal And Installation.
8. Remove instrument lower cover, instrument driver panel, instrument assist lower panel and instrument side panel (LH/RH). Refer to Removal And Installation.
9. Remove YAW RATE/G-SENSOR (1). Refer to Removal and Installation.





10. Remove diagnosis sensor unit (2). Refer to Removal and Installation.
11. Remove console rear bracket (3). Refer to Removal And Installation.
12. Remove floor harness mounting clamps (A).
13. Remove dash side finisher (LH/RH), front kicking plate inner (LH/RH) and body side welt (LH/RH). Refer to Body Side Trim.
14. Remove floor trim mounting clips and fixing nuts.





15. Remove floor trim from floor trim fixing clips (A) and remove floor carpet (1).

INSTALLATION
Install in the reverse order of removal.