Rear Cross-Member: Service and Repair

REAR SUSPENSION ASSEMBLY


Inspection and Adjustment


MOUNTING INSPECTION
Make sure the mounting conditions (looseness, backlash) of each component and component conditions
(wear, damage) are normal.

BALL JOINT AXIAL END PLAY
Measure axial end play by placing and moving up/down with an iron bar or equivalent between suspension arm and axle assembly.

Standard
Axial end play : Refer to RSU-26, "Ball Joint". Ball Joint


CAUTION:
Be careful not to damage ball joint boot.

SHOCK ABSORBER
Check for oil leakage, damage and replace if malfunction is detected.