Initial Inspection and Diagnostic Overview

AUTOMATIC DRIVE POSITIONER

Work Flow
1. Check the symptom and customer's requests.
2. Understand the system description. Refer to SE-12, "System Description". Automatic Drive Positioner
3. Perform the self-diagnosis results, using CONSULT-III. Refer to SE-35, "CONSULT-III Function (AUTO DRIVE POS.)". CONSULT-III Function (AUTO DRIVE POS.)
4. Repair or replace depending on the self-diagnostic results.
5. Based on the trouble diagnosis chart, repair or replace the cause of the malfunction. Refer to SE-37, "Symptom Chart". Symptom Related Diagnostic Procedures
6. Does the automatic drive positioned system operate normally?
If it is normal, GO TO 7.
If it is not normal, GO TO 3.

7. INSPECTION END