Reverse Idler Shaft and Gear

Disassembly
Remove reverse idler thrust washer, reverse idler gear and reverse idler needle bearing from reverse idler shaft.

Assembly
Assembly in the reverse order of disassembly.

CAUTION:
Apply recommended grease to reverse idler needle bearing.

Inspection

REVERSE IDLER SHAFT AND GEAR
If the contact surface on reverse idler gear and reverse idler shaft has damage, peeling, abrasion, dent, bent, or any other damage, replace the components.

BEARING
If the bearing does not rotate smoothly or the contact surface on roller or race is damaged or peeled, replace with new ones.