Power Window Switch: Service and Repair
ON-VEHICLE REPAIRPOWER WINDOW MAIN SWITCH
Removal and Installation
REMOVAL
1. Remove the power window main switch finisher (2).
2. Power window main switch (1) is removed from power window main switch finisher (2) using flat-head screw driver (A) etc.
CAUTION: Do not fold the pawl of power window main switch finisher.
NOTE: The same procedure is also performed for power window subswitch.
INSTALLATION
Install in the reverse order of removal.
NOTE: Power window main switch is exchanged or is detached it is necessary to do the initialization procedure. Refer to PWC-4, "ADDITIONAL SERVICE WHEN REMOVING BATTERY NEGATIVE TERMINAL : Special Repair Requirement". Additional Service When Removing Battery Negative Terminal