Steering Angle Sensor: Service and Repair

Removal and Installation

BRC-105 Exploded View:

REMOVAL
1. Remove spiral cable assembly.
2. Remove steering angle sensor from spiral cable assembly.

INSTALLATION
Note the following, and install in the reverse order of removal.

CAUTION:
^ After work, make sure to adjust neutral position of steering angle sensor. Refer to BRC-8, "ADJUSTMENT OF STEERING ANGLE SENSOR NEUTRAL POSITION: Description". Testing and Inspection
^ Perform 4WAS front actuator adjustment. Refer to STC-27, "4WAS FRONT ACTUATOR NEUTRAL POSITION ADJUSTMENT: Description". 4WAS Front Actuator Neutral Position Adjustment