Trunk / Liftgate Weatherstrip: Service and Repair

TRUNK LID WEATHERSTRIP

TRUNK LID WEATHERSTRIP : Exploded View

DLK-229 Exploded View:

TRUNK LID WEATHERSTRIP : Removal and Installation

REMOVAL
Pull up and remove engagement with body from weather-strip joint.

CAUTION: After removal, do not pull strongly on the weather-strip.

INSTALLATION
1. Align the weather-strip seam (upper) with mark of the body panel and weather-strip onto the vehicle.
2. Align the weather-strip seem (lower) with center of the striker and weather-strip onto the vehicle.
3. After installation, pull the weather-strip gently to ensure that there is no loose section.

NOTE: Check that the weather-strip fits tightly at each corner and trunk rear plate.