Carpet: Service and Repair

FLOOR TRIM

Exploded View

INT-19 Exploded View:

Removal and Installation

REMOVAL
1. Remove front seat (LH/RH).
2. Remove rear seat cushion.
3. Remove accelerator pedal pad.




4. Disengage clip of floor hook (1) with remover tool (A).
5. Remove foot grille.
6. Remove front seat belt floor anchor bolt (LH/RH). Refer to SB-5, "SEAT BELT RETRACTOR : Removal and Installation".
7. Remove center console assembly.
8. Remove instrument lower cover, instrument driver panel, instrument assist lower panel and instrument side panel (LH/RH).




9. Remove G-sensor (1).
10. Remove diagnosis sensor unit (2).
11. Remove console rear bracket (3).
12. Remove floor harness mounting clamps (A).
13. Remove dash side finisher (LH/RH), front kicking plate inner (LH/RH) and body side welt (LH/RH).
14. Remove floor trim mounting clips and fixing nuts.




15. Remove floor trim from floor trim fixing clips (A) and remove floor carpet (1).

INSTALLATION
Install in the reverse order of removal.