Direct Clutch

Direct Clutch

Exploded View AT-341 (VK45DE Models):

DISASSEMBLY





1. Using a flat-bladed screwdriver, remove snap ring from direct clutch drum.
2. Remove drive plates, driven plates, dish plate and retaining plates from direct clutch drum.

INSPECTION
^ Check the following, and replace direct clutch assembly if necessary.

Direct Clutch Snap Ring
^ Check for deformation, fatigue or damage.

Direct Clutch Drive Plates and Driven Plates
^ Check facing for burns, cracks or damage.

Direct Clutch Dish Plate and Retaining Plates
^ Check facing for burns, cracks or damage.

ASSEMBLY
1. Install drive plates, driven plates, dish plate and retaining plates in direct clutch drum.

CAUTION: Take care with the order of plates.





^ VQ35DE models
- Snap ring (1)
- Retaining plate (2)
- Drive plate (3)
- Driven plate (4)
- Dish plate (5)
- Drive plate/Driven plate: 5/4





^ VK45DE models
- Snap ring (1)
- Retaining plate (2)
- Drive plate (3)
- Driven plate (4)
- Dish plate (5)
- Drive plate/Driven plate: 6/6





2. Using a flat-bladed screwdriver, install snap ring in direct clutch drum.