Radiator Support: Service and Repair
RADIATOR CORE SUPPORTExploded View BL-21:
Removal and Installation
REMOVAL
1. Remove front bumper, bumper reinforcement.
2. Remove headlamp (LH/RH).
3. Remove air duct.
4. Remove hood lock assembly, then remove hood lock cable. Refer to "Removal and Installation of Hood Lock Control".
5. Remove washer tank. Refer to "Removal and Installation of Washer Tank".
6. Remove ambient sensor.
7. Remove crash zone sensor.
8. Remove air guide (LH/RH).
9. Remove power steering tube assembly.
10. Remove horn (High/Low).
11. Remove mounting harness clip on radiator core support assembly, the harness is separate.
12. Remove ICC sensor integrated unit. Refer to "ICC Sensor Integrated Unit".
13. Remove upper radiator bracket (LH/RH) with power tool.
14. Remove radiator core support side with power tool.
15. Remove radiator core support side (LH/RH) with power tool.
16. Remove radiator core support center.
CAUTION: Put a wooden block under the radiator assembly to prevent the radiator assembly from falling.
INSTALLATION
Install in the reverse order of removal.