Wiper Motor and Linkage

Disassembly and Assembly of Front Wiper Motor and Linkage

Exploded View WW-34:

DISASSEMBLY
1. Remove wiper linkages from wiper motor and wiper frame.
2. Remove wiper motor mounting bolts, and remove wiper motor from wiper frame.

CAUTION: Be careful not to bend wiper linkages nor to damage the resin part of ball joint when removing wiper linkages.

ASSEMBLY
1. Connect wiper motor connector. Turn front wiper switch ON to operate wiper motor, and then turn front wiper switch OFF (auto stop).
2. Disconnect wiper motor connector.
3. Install wiper motor to wiper frame.

Wiper motor bolts Torque: 4.5 N.m (0.46 kg-m, 40 in-lb)

4. Install wiper linkages to wiper frame and wiper motor.

CAUTION:
- Never drop the wiper motor nor cause it to interfere with other parts.
- Check joint of motor arm and wiper linkages (at retainer) for grease conditions. Apply grease if necessary.