Direct Clutch
Direct ClutchExploded View AT-296:
DISASSEMBLY
1. Using a flat-bladed screwdriver, remove snap ring from direct clutch drum.
2. Remove drive plates, driven plates, dish plate and retaining plate from direct clutch drum.
INSPECTION
^ Check the following, and replace direct clutch assembly if necessary.
Direct Clutch Snap Ring
^ Check for deformation, fatigue or damage.
Direct Clutch Drive Plates
^ Check facing for burns, cracks or damage.
Direct Clutch Retaining Plate and Driven Plates
^ Check facing for burns, cracks or damage.
ASSEMBLY
1. Install drive plates, driven plates, dish plate and retaining plate in direct clutch drum.
CAUTION: Take care with order of plates.
^ Snap ring (1)
^ Retaining plate (2)
^ Drive plate (3)
^ Driven plate (4)
^ Dish plate (5)
^ Drive plate/Driven plate: 5/4
2. Using a flat-bladed screwdriver, install snap ring in direct clutch drum.