Removal and Replacement

G-SENSOR

Removal and Installation
REMOVAL
A/T Models

1. Remove center console.
2. Disconnect harness connector.
3. Remove installation bolts. Remove yaw rate/side G sensor.

CAUTION:
^ Do not drop or strike yaw rate/side G sensor, because it has little endurance to Impact.
^ Do not use power tool etc., because yaw rate/side G sensor is sensitive for the Impact.

INSTALLATION
Installation is in the reverse order of removal.

CAUTION:
^ Do not drop or strike yaw rate/side G sensor, because it has little endurance to Impact.
^ Do not use power tool etc., because yaw rate/side G sensor is weak for the Impact.