Cannot Be Changed to Manual Mode

Cannot Be Changed to Manual Mode

SYMPTOM: Does not change to manual mode when manual shift gate is used.

DIAGNOSTIC PROCEDURE

1. CHECK MANUAL MODE SWITCH
Check the manual mode switch. Refer to AT-160, "DTC P1815 MANUAL MODE SWITCH". P1815
OK or NG
OK >> GO TO 2.
NG >> Repair or replace damaged parts.

2. CHECK SELF-DIAGNOSTIC RESULTS
Perform self-diagnosis. Refer to AT-86, "SELF-DIAGNOSTIC RESULT MODE", AT-95, "Diagnostic Procedure Without CONSULT-II".
Self-Diagnostic Result Mode
Is any malfunction detected by self-diagnostic results?
YES >> Check the malfunctioning system. Refer to AT-86, "SELF-DIAGNOSTIC RESULT MODE", AT-97, "Judgment Self-diagnosis Code".
Self-Diagnostic Result Mode
NO >> INSPECTION END