Turn Signal Bulb: Service and Repair

FRONT TURN SIGNAL LAMP
1. Turn lighting switch OFF.
2. Open the driver and front passenger window, and then disconnect the battery cable from the negative terminal or remove power fuse.

CAUTION: After the battery cables are disconnected, never open/close the driver and/or front passenger door with the window in the full up position. The automatic window adjusting function will not work and the side roof panel may be damaged.

3. Remove fender protector (front).
4. Turn bulb socket counterclockwise and unlock it.
5. Remove bulb from its socket.
6. Installation is the reverse order of removal.

Headlamp low/high beam (Xenon) : 12 V - 35 W (D2S)
Front fog lamp : 12 V - 55 W (H1)
Parking lamp : 12 V - 5 W
Front turn signal lamp : 1 2 V - 21 W (amber bulb)

CAUTION: After installing bulb, be sure to install plastic cap and bulb socket securely to insure watertightness.