Disassembly and Assembly

Exploded View LT-33:

Disassembly
1. Turn the plastic cap (high/low) counterclockwise and remove it.
2. Disconnect the high beam solenoid connector.
3. Turn the xenon bulb socket counterclockwise and remove it.
4. Unlock the retaining spring and remove the xenon bulb (high/low).
5. Disconnect the HID C/U connector.
6. Remove the mounting screws from the HID C/U.
7. Disconnect the HID connector and remove a screw from the HID C/U.
8. Turn the plastic cap (front fog) counterclockwise and remove it.
9. Disconnect the halogen bulb power supply harness and halogen bulb ground harness from the halogen bulb (front fog).
10. Unlock the retaining spring and remove the halogen bulb (front fog).
11. Push the claw of the parking lamp bulb socket and remove it.
12. Remove the parking lamp bulb from its socket.
13. Turn the front turn signal lamp bulb socket counterclockwise and remove it.
14. Remove the front turn signal lamp bulb from its socket.
15. Remove the headlamp assembly connector.

Assembly
Assembly is the reverse order of disassembly.

HID control unit : 3.2 N.m (0.33 kg-m, 28 in-lb)

CAUTION:
- When HID control unit is removed, reinstall it securely and avoid any looseness.
- After installing bulb, be sure to install plastic cap and bulb socket securely to insure watertightness.