Removal and Installation

BLOWER UNIT

Removal and Installation

REMOVAL
1. Remove glove box assembly and instrument lower cover.




2. Remove mounting nuts, and then remove ECM with bracket attached.
3. Disconnect intake door motor connector and blower fan motor connector.
4. Remove mounting bolt and screws, and then remove blower unit.

CAUTION: Move blower unit rightward, and remove locating pin (1 part) and joint. Then remove blower unit downward.




5. Remove blower unit.

INSTALLATION
Installation is basically the reverse order of removal.

CAUTION: Make sure locating pin (1 part) and joint are securely inserted.