Sensor Rotor

SENSOR ROTOR

Removal and Installation
REMOVAL

CAUTION: Never reuse sensor rotor.

Front
^ Sensor rotor cannot be disassembled. Remove the sensor rotor as of being integrated to hub bearing assembly.

Rear
^ Follow procedure below to remove rear sensor rotor.
- Remove side flange.
- Using a bearing replacer (suitable tool) and puller (suitable tool), remove sensor rotor from side flange.

INSTALLATION
Front
^ Sensor rotor cannot be disassembled. Remove the sensor rotor as of being integrated to hub bearing assembly.

Rear





^ Follow procedure below to install rear sensor rotor.
- Using a drift (SST), press rear sensor rotor onto side flange.
Tool number
A: ST30720000 (J-25405)
B: ST27863000 (-)
C: KV40104710 (-)
- Install side flange.