Removal and Installation

REAR DISC BRAKE

Image Symbols:

WARNING: Clean dust on caliper and brake pad with a vacuum dust collector to minimize the hazard of airborne particles or other materials.

CAUTION:
^ While removing cylinder body, never depress the brake pedal because the piston will pop out.
^ It is not necessary to remove bolts on torque member and brake hose except for disassembly or replacement of the caliper assembly. In this case, hang cylinder body with a wire so as not to stretch brake hose.
^ Do not damage piston boot.
^ If any shim is subject to serious corrosion, replace it with a new one.
^ Always replace shims and shim covers as a set when replacing brake pads.
^ Keep the rotor clean of brake fluid.