Data Monitor

Data Monitor
OPERATION PROCEDURE
1. Perform "CONSULT-II Start Procedure". Refer to GI-37, "CONSULT-II Start Procedure". Testing and Inspection
2. Touch "DATA MONITOR".

CAUTION: When "START (NISSAN BASED VHCL)" is touched immediately after starting the engine or turning on the ignition switch, "ABS" might not be displayed in the "SELECT SYSTEM" screen. In this case, repeat the operation from step 2.

3. Return to the "SELECT MONITOR ITEM" screen, and touch "ECU INPUT SIGNALS", "MAIN SIGNALS" or "SELECTION FROM MENU". Refer to the following information.
4. When "START" is touched, the data monitor screen is displayed.

DISPLAY ITEM LIST (Part 1):

DISPLAY ITEM LIST (Part 2):

DISPLAY ITEM LIST (Part 3):