Functions

Functions
VDC
^ In addition to the TCS/ABS function, the driver steering amount and brake operation amount are detected from the steering angle sensor and pressure sensor, and the vehicle's driving status (amount of under-steering/over-steering) is determined from information from the yaw rate/side G sensor, wheel sensor, etc., and this information is used to Improve vehicle stability by controlling the braking and engine power to all four wheels.
^ The SLIP indicator lamp flashes to inform the driver of VDC operation.
^ The ABS warning lamp, VDC OFF indicator lamp, and SLIP indicator lamp might turn on when the vehicle is subject to strong shaking or large vibration, such as when the vehicle is on a turn table or a ship while the engine is running. In this case, restart the engine on a normal road, and if the ABS warning lamp, VDC OFF indicator lamp, and SLIP indicator lamp turn off, there is no problem.

TCS
^ The wheel spin of the drive wheels is detected by the VDC/TCS/ABS control unit from the wheel speed signals from the four wheels, so if wheel spin occurs, the rear wheel right and left brake fluid pressure control and engine fuel cut are conducted while the throttle value is restricted to reduce the engine torque and decrease the amount of wheel spin. In addition, the degree the throttle is opened is controlled to achieve the optimum engine torque.
^ TCS may be activated any time the vehicle suddenly accelerates, suddenly downshifts, or is driven on a road with a varying surface friction coefficient.
^ During TCS operation, it informs a driver of system operation by flashing SLIP indicator lamp.

ABS
^ The Anti-Lock Braking System is a function that detects wheel revolution while braking, and it Improves handling stability during sudden braking by electrically preventing 4 wheel lock. Maneuverability is also Improved for avoiding obstacles.
^ If the electrical system breaks down, then the Fail-Safe function starts, the ABS becomes inoperative, and the ABS warning lamp turns on.
^ Electrical system diagnosis by CONSULT-II is available.

EBD
^ The Electronic Brake Distribution is a function that detects subtle slippages between the front and rear wheels during braking, and it Improves handling stability by electronically controlling the Brake Fluid Pressure which results in reduced rear wheel slippage.
^ In case of electrical system break down, the Fail-Safe function is activated, the EBD and ABS becomes inoperative, and the ABS warning lamp and brake warning lamp are turned on.
^ Electrical system diagnosis by CONSULT-II is available.