Trunk / Liftgate Lock: Service and Repair

Removal and Installation of Trunk Lid Lock

REMOVAL




1. Remove the trunk lid finisher. Refer to "Removal and Installation for Trunk Room Trim".
2. Disconnect the emergency handle and trunk lid opener cable from the clip.
3. After removing the harness connector, remove the mounting bolts, and remove the trunk lid lock.

INSTALLATION
1. Install in the reverse order of removal.
2. After installing, close the trunk lid height. Perform the lock and surface height adjustment. Refer to BL-165, "Fitting Adjustment". Adjustments
3. After installing, check the operation.