Removal and Installation

VK45DE ENGINE MODELS




Removal
1. Disconnect the battery cable from the negative terminal.




2. Remove engine front and rear undercover, using power tools.
3. Remove left engine mounting insulator and left engine mounting bracket. Refer to "ENGINE ASSEMBLY".
4. Remove "B" terminal nut (1).
5. Disconnect "S" connector (2).
6. Remove the bolt (A) and the harness bracket (3).
7. Remove starter motor mounting bolts (B), using power tools.
8. Remove starter motor forward from the vehicle.

Installation
Installation is the reverse order of removal.

CAUTION: Be sure to tighten "B" terminal nut carefully.