Data Monitor

DATA MONITOR

Operation Procedure
1. Touch "WIPER" on the "SELECT TEST ITEM" screen.
2. Touch "DATA MONITOR" on "SELECT DIAG MODE" screen.




3. Touch either "ALL SIGNALS" or "SELECTION FROM MENU" on "SELECT MONITOR ITEM" screen.
4. When "SELECTION FROM MENU" is selected, touch items to be monitored. If "ALL SIGNALS" is selected, all items will be monitored.
5. Touch "START".
6. Touch "RECORDING START" while monitoring to record the status of the item being monitored. To stop recording, touch "RECORDING STOP".

Display Item List - Data Monitor:

Display Item List