CAN Communication Line
CAN Communication LineDIAGNOSTIC PROCEDURE
^ Check the following if "CAN COMM CIRCUIT [U1000]" is detected in self-diagnosis results of CONSULT-II.
1. CHECK CAN COMMUNICATION CIRCUIT
With CONSULT-II
1. Turn ignition switch "ON" and start engine.
2. Select "SELF-DIAG RESULTS" mode for "ALL MODE AWD/4WD" within CONSULT-II.
3. Perform the self-diagnosis. Is the "CAN COMM CIRCUIT [U1000]" displayed?
YES >> Print out CONSULT-II screen and go to LAN-7, "Precautions When Using CONSULT-II". Precautions When Using CONSULT-II
NO >> INSPECTION END