Active Test

OPERATION PROCEDURE
1. Touch "START (NISSAN BASED VHCL)" "AIR PRESSURE MONITOR" "ACTIVE TEST".
- If "AIR PRESSURE MONITOR" is not displayed, print the "SELECT SYSTEM" screen.

NOTE: Just after starting engine, or turning ignition switch ON, it may not be displayed even if "START (NISSAN BASED VHCL)" is touched. In this case, reconnect CONSULT-II and CONSULT-II CONVERTER.

2. "ACTIVE TEST" is displayed.

TEST ITEM LIST:

NOTE: Before performing the self-diagnosis, be sure to register the ID, or else the actual malfunction location may be different from that displayed on CONSULT-II.