Data Monitor

Data Monitor
OPERATION PROCEDURE
1. Touch "START (NISSAN BASED VHCL)" "RAS/HICAS" "DATA MONITOR". If RAS/HICAS is not displayed, print the "SELECT SYSTEM" screen. Then refer to LAN-7, "Precautions When Using CONSULT-II". Precautions When Using CONSULT-II

NOTE: Just after starting engine, or turning ignition switch ON, it may not be displayed even if "START (NISSAN BASED VHCL)" is touched. In this case, reconnect CONSULT-II and CONSULT-II CONVERTER.

2. Return to the monitor item selection screen, and touch any of "ALL SIGNALS", "SELECTION FROM MENU".
3. Touch "START".
4. "DATA MONITOR" screen is displayed.

DISPLAY ITEM LIST:

DISPLAY ITEM LIST: